Your Reference

Please specify approx. quantity, sizes and whether toughened or annealed (required)

Thickness
(This is the make up e.g. 4/4/4: 4mm inner and outer pane and a 4mm warm edge spacer giving overall thickness of 12mm.)
10mm Can't be toughened. Can't have low "E" glass so very poor "U" value. NOT RECOMMENDED
11mm - Can only be toughened one side.
12mm - RECOMMENDED
14mm - RECOMMENDED

10mm11mm12mm14mm16mm

Glass Type
Softcoat Low E - Excellent "U" value. Recommended to achieve the lowest "U" value.
No Low E - NOT RECOMMENDED

Softcoat glass orders

Due to an inconsistent supply chain of our softcoat glass we are changing glass producers which may result in a slight difference in the tint of the glass. If you require glass to match a previous order please let us know at the time of enquiry and quote the previous job number.

Softcoat Low ENo Low E

Spacer Colour
(Black/White - 6,7,8,9 & 11mm / Grey Spacer (only 9 & 11 mm).
Black is RECOMMENDED. It gives a good shadow line on slim units.
White is more expensive.

BlackWhiteGrey

Sightlines (Required)
(What you see on the face of the unit, where the glass sits on the rebate. Rebate needs to be 1.5mm larger than the sightline.)
6mm - 3 year guarantee on annealed and toughened.
7mm - 10 year guarantee on annealed and toughened. Black recommended. White more expensive.
8mm - 10 year guarantee on annealed and toughened. Black recommended. White more expensive.
9mm - 10 year guarantee on annealed and toughened. Less expensive version of white.
11mm - 10 year guarantee on annealed and toughened.

678911Other

Gas (Required)
Argon Gas - Will give a lower "U" value in a slim unit. But cost effective. OK for thicker units 20mm+
Krypton Gas - Good "U" value but more expensive
No Gas - Will give very poor "U" value. NOT RECOMMENDED

KryptonArgonNo Gas

Toughened Glass
Toughened glass is more expensive than annealed and, due to the toughening process is renowned for problems of warping, scratches and imperfections. The delivery period for toughened is longer than for annealed units.

SAFETY MARKINGS - Toughened units require safety markings. This can be a KITE MARK which is placed in a corner, not necessarily the same corner or a LINE LOGO which runs along the edge and is hardly visible. We can also provide a certificate.

It is well worth only ordering toughened strictly when it is needed to reduce costs. (Please give us a call for guidance).

ToughenedNon Toughened

U Value
This indicates the thermal efficiency of units and there are options depending upon budget and efficiency.

Best U Value (more expensive)Standard U ValueLow U Value (most economical)

Delivery or Collection

DeliveryCollection

Company Address (required)

Delivery Address - if different

Any Special Requirements